 |
This simple Module designed to work with our PowerPro system (or any vacuum pump and canister) has two distinct functions. The clip on the left is a vacuum fill setup for the 29, 14, and 26 carts. A vacuum is applied to the print head, and ink is sucked in through the lower vent. The clip on the right is set up to empty cartridges, removing ink or cleaning solution. The end user can decide to remove liquids through the lower vent or the print head |
| As a fill tool for the 29, 14, and 26 cartridges this tool is unbeatable. Add a syringe, 40 cc's of ink and you have a recycled cartridge in minutes. Move the syringe to the print head side and pull ink through the print head for proper priming. |
 |
 |
The image to the left shows a machine designed for Ecotec of Norway which incorporates a 29 quickfill, a cartridge emptying device, a vacuum fill and a quick clean device. This entire unit takes up about 36 square inches of work space. Individual photos are shown below. |
 |
 |
 |