Refilling these cartridges is very, very simple! Experienced recyclers can have the cartridge refilled and back in the printer in just a few minutes

1. Put the needle on the syringe.

2. Insert the needle into the ink bottle and add about 15 cc's of ink to the syringe. Place the cap back on the ink bottle.

3.  Remove the label from the top of the cartridge

4. Using the included thumb drill, enlarge the fill hole.

 5. S l o w l y inject the ink into the cartridge. If the ink starts to back up out of the cartridge simply pull back on the plunger to remove a few cc's of ink and return the extra ink to the bottle.

You do not need to replace the label.

Recycling the color cartridge is very similar except you have 3 holes to enlarge and fill.